HOW TO INSTALL RAIL BOLTS
TOOLS REQUIRED — Power drill & 13/64 drill bit · Phillips screwdriver · Pen or pencil
IN THE PACK — 8× rail bolts · 8× screws
1
PLACE & POSITION THE RAILS ON BOARD
Set the rails on the underside of the deck, exactly where you want them to sit.
2
MARK THE HOLES
Hold the rail in place and mark every hole with a pen or pencil.
3
DRILL HOLES IN SKATEBOARD
Drill each mark with a 13/64 bit.
4
PUSH RAIL BOLTS INTO HOLES
Push a rail bolt into every hole from the top of the deck.
5
PLACE RAILS & TIGHTEN SCREWS
Set the rails over the bolts and run the screws down tight.
